Filter
Top Products
Linking the unit with the switcher
This setting is used to link the unit with an optional switcher
(AW-HS50).
w Switcher network settings
1 Set the MENU button to ON.
Press the MENU button to light its indicator.
2 Set PRESET MEMORY/MENU 10 button
(SYSTEM) to ON.
When the button is pressed and its indicator is lighted,
the [SYSTEM] menu is displayed on the LCD panel.
[1]CAMERA CTL ▼
3 Turn the F1 dial, display the SW IP ADR menu,
and press the F1 dial.
[7]SW IP ADR
1.IP:SW
192 168.000.020
Press the F1 dial.
4 Turn the F2 dial, select the IP address, and then
press the F2 dial to enter the selection.
Set the IP address which has been set in the switcher.
1.IP:SW
192 168.000.020
1.IP:SW
172.168 000.020
Turn the F2 dial, and then press
it.
Input the IP address in four blocks of numerals. When
input advances to the last block and the F2 dial is
pressed, the IP address is entered.
1.IP:SW
172.168.000.030