Filter
Top Products
Setting the functions
w Assigning preset data when
emergency interrupts occur
Preset numbers can be assigned to execute presets for all
the connected remote cameras when signals have been
input to the TALLY/GPI input/output connector.
The presets are assigned using the GPI item on the
[SETUP] menu.
[8]GPI
Setting the preset numbers
From the [SETUP] menu, select [GPI], and display
[EMERGENCY MD1], [EMERGENCY MD2] or
[EMERGENCY MD3]. Then set the preset number.
1.EMERGENCY MD1▼
1
This setting can be established for each GPI/O input.
p Input1: EMERGENCY MD1
p Input2: EMERGENCY MD2
p Input3: EMERGENCY MD3
w Locking the button operations
This disables the operation of the CAMERA OSD button,
and PRESET MEMORY/MENU buttons (1 to 7).
The button operations are locked using the MENU CTL item
of the [SETUP] menu.
[10]MENU CTL ▲
Setting button operation enable or disable
From the [SETUP] menu, select [MENU CTL] and display
[MENU CONTROL]. Then set button operation enable or
disable.
1.MENU CONTROL
ENABLE
When “DISABLE” is selected, the following button operations
are disabled:
p CAMERA OSD button
p MENU 1 to 7 buttons
(However, these buttons can still be used to execute
preset settings.)