Panasonic AW-RP50N Camera Accessories User Manual


 
12
Parts and their functions
CAMERA OSD button [CAMERA OSD]
When the CAMERA OSD button is held down, its
indicator lights, and the on-screen menu of the selected
remote camera is displayed as the output image of the
remote camera.
When the button is held down again while its indicator is
lighted, the menu is cleared, and the indicator goes off.
EXIT button [EXIT]
Press this during menu operations to return to the
previous hierarchical level.
USER buttons [USER1, USER2]
The functions of some of the setting items on the menus
can be assigned to [USER1] and [USER2] to be recalled
later.
For details, refer to “Setting the USER buttons”
(<Operations and Settings> Instructions).
MENU button [MENU]
Press this to recall the menus using the PRESET
MEMORY/MENU buttons (). When it is pressed again
while its indicator is lighted, the menu is cleared, and the
indicator goes off.
Button indicator ON:
The menu operations take effect.
Button indicator OFF:
The menu operations have no effect.
For details, refer to “Basic operations for the menus”.
PAGE button [PAGE]
Press this to specify the preset memory of the remote
camera.
When the button is pressed, its indicator lights, and the
mode for selecting the page of the preset memory is
established.
In this mode, press one of the PRESET MEMORY/MENU
buttons (), and specify the page number.
Next, specify the number on the page using one of the
PRESET MEMORY/MENU buttons.
For details, refer to “Setting and operating the preset
memories” (<Operations and Settings> Instructions).
STORE button [STORE]
Press this to register the preset memory data of the
currently selected remote camera.
When it is pressed again while its indicator is lighted, the
menu is cleared, and the indicator goes off.
Button indicator ON:
The preset memory data registration mode is
established.
Button indicator OFF:
The preset memory data registration mode is
released.
For details, refer to “Setting and operating the preset
memories” (<Operations and Settings> Instructions).
DELETE button [DELETE]
Press this to delete the preset memory data for the
currently selected remote camera.
When it is pressed again while its indicator is lighted, the
menu is cleared, and the indicator goes off.
Button indicator ON:
The preset memory data deletion mode is
established.
Button indicator OFF:
The preset memory data deletion mode is released.
For details, refer to “Setting and operating the preset
memories” (<Operations and Settings> Instructions).
PRESET MEMORY/MENU buttons
[PRESET MEMORY/MENU]
Use these buttons to recall the preset memory data and
recall menus.
MENU
button
()
PAGE
button
()
When the PRESET MEMORY/MENU
buttons are pressed
OFF OFF
The data in preset memories 1 to 10
are recalled.
OFF ON
The data in preset memories 11 to 100
are recalled.
ON OFF The menus are recalled.
CAMERA STATUS/SELECTION buttons
[CAMERA STATUS/SELECTION]
Use these buttons to select up to five remote cameras.
Button indicator ON:
The corresponding remote camera is selected.
Button indicator OFF:
The selection of the corresponding remote camera
is released.
Using the menu, up to 100 remote cameras can be
divided into 1 to 20 groups, and then registered and
controlled. The statuses of the remote cameras assigned
to buttons 1 to 5 can be identified using the indicators
positioned above the buttons.
For details, refer to “Selecting the remote cameras to
be operated”.
ZOOM button [ZOOM]
Use this to adjust the lens zoom.
When the TELE end is pressed:
Telephoto setting
When the WIDE end is pressed:
Wide-angle setting
The zooming speed changes depending on the extent to
which the button is pressed.