Filter
Top Products
14
Parts and their functions
w Rear panel
SIGNAL GND
TALLY/GPI
TO PAN/TILT HEAD
54321
SV
POWER
ON
BOOT
NM
12V IN
LAN
"
!
POWER switch [POWER]
When the POWER switch is set to the ON position,
the POWER indicator () lights, and the unit can be
operated.
TO PAN/TILT HEAD 1 to 5 connectors
[TO PAN/TILT HEAD 1-5] (RJ-45)
Connect the remote cameras to these connectors using
straight cables (category 5).
LAN connector [LAN] (RJ-45)
(10BaseT/100BaseTX)
Connect the remote camera, switcher or host computer
that supports IP connections to this connector using a
LAN cable.
When directly connecting a device to the unit, use a
crossover cable (category 5 or above).
When making the connection through a hub or other
device, use a straight cable (category 5 or above).
TALLY/GPI input/output connector [TALLY/GPI]
(D-sub 15-pin, female, inch thread)
For details, refer to “Control interface for external
devices” (<Operations and Settings> Instructions).
DC IN socket [12V IN] (DC 12 V)
The AC adapter provided with the unit is connected to
this socket.
Ground terminal [SIGNAL GND]
Connect this to the system’s ground.
! SERVICE switch [SV/NM]
This switch is used for maintenance purposes.
Normally, it is set at the “NM” position.
" Wire fastening fitting
An anti-theft wire available on the market can be fastened
to this fitting to prevent theft.