Patton electronic 2120 Security Camera User Manual


 
10
System Features
Ability to display boot message on the serial interface
Selectable default gateway IP address for use when the destination IP
address cannot be found
DHCP enable/disable for static or dynamic IP addressing of the unit
Selectable unit IP address
Ability to change factory assigned unit MAC Address, MAC Address
preserved when configuration is default
Ability to enable/disable unit management/configuration via remote
Telnet session
Ability to display the current active user on the serial interface
Ability to disable the user interface at the serial interface when using
Telnet or Raw-TCP
Selectable unit management inactivity timeout (minutes) with disable
option
Ability to change the preset system command prompt (TS>) to
uniquely identify the unit
Selectable unit Subnet Mask
RAW UDP protocol support
User Database
Fully integrated 64-user database with Telnet, RawTCP and PPP oper-
ation
All user security accessed through database
Telnet and RawTCP operations support multiple users
Utilities
Ability to remotely perform a soft boot of the unit
Configuration reset to factory default configuration via SW1 (Will not
reset MAC Address)
Ability to clear configuration changes prior to being activated/written to
memory