Filter
Top Products
64
Accessibility:
READ/WRITE
Default:
0.0.0.0
Valid Entries:
Any in IP address format.
configure eia232 ppp rxaccm X
Receive async contrl character map
configure eia232 ppp txaccm X
Transmit async contrl character map
configure eia232 ppp userauthprot X
Permits the use of PAP as a user authentication protocol with PPP oper-
ations.
Accessibility:
READ/WRITE
Default:
none
Valid Entries:
none, pap
configure eia232 rawtcp_telnet
Returns the Configure EIA232 RawTCP/Telnet Help Menu.
Accessibility:
N/A
Default:
N/A
Valid Entries:
N/A
Note Needs to be entered first in all “configure eia232 rawtcp_telnet”
command strings.
configure eia232 rawtcp_telnet confromlocena
X
Permits the automatic connection request to a remote device over the
LAN.
Accessibility:
READ/WRITE
Default:
no
Valid Entries:
yes, no
Note To activate the auto connection feature, this must be set to YES,
“configure eia232 rawtcp_telnet conretryfreq” must be set to any
number (up to 65535) other than 0, and a valid IP address must
be entered into “configure eia232 rawtcp_telnet remip”.
configure eia232 rawtcp_telnet confromremena
X
Permits incoming connection requests to the serial interface from a
remote device over the LAN.
Accessibility:
READ/WRITE
Default:
yes
Valid Entries:
yes, no
configure eia232 rawtcp_telnet conretryfreq
X
Sets the connection retry frequency (in seconds) that automatic connec-
tion requests are sent to a remote device.
Accessibility:
READ/WRITE