Patton electronic 2120 Security Camera User Manual


 
60
Note MUST be entered immediately after each “configure” command
string to activate configuration changes.
configure clear
Clears changes in configuration parameters prior to “activating” them
and reverts back to the previous settings.
Accessibility:
N/A
Default:
N/A
Valid Entries:
N/A
Note Once changes in parameters are activated/written to flash mem-
ory using the “configure activate” command, the clear function
will have no effect and you must go back in and undo any undes-
ired changes.
configure eia232
Returns the Configure EIA232 Help Menu.
Accessibility:
N/A
Default:
N/A
Valid Entries:
N/A
Note Needs to be entered first in all “configure eia232” command
strings.
configure eia232 interface
Returns the Configure EIA232 Interface Help Menu.
Accessibility:
N/A
Default:
N/A
Valid Entries:
N/A
Note Needs to be entered first in all “configure eia232 interface” com-
mand strings.
configure eia232 interface charlength
X
Sets the RS-232 Character Length (in bits) of the serial interface.
Accessibility:
READ/WRITE
Default:
8 (bits)
Valid Entries:
5, 6, 7, 8
configure eia232 interface datarate
X
Sets the RS-232 Datarate (in bits per second) of the serial interface.
Accessibility:
READ/WRITE
Default:
9600 (bits per second)
Valid Entries:
50, 75, 110, 150, 300, 600, 1200, 2400, 4800, 9600,
19200, 38400, 57600, 115200
configure eia232 interface defgatewaycfg
Default gateway configured.