Filter
Top Products
71
show eia232 interface charlength
Returns current RS-232 Character Length setting.
Accessibility:
READ ONLY
show eia232 interface curuserlogged
Returns the user name of the current active user on the serial interface.
Accessibility:
READ ONLY
show eia232 interface datarate
Returns current RS-232 Datarate setting.
Accessibility:
READ ONLY
show eia232 interface defgatewayactive X
Default gateway active
show eia232 interface defgatewaycfg X
Default gateway configured
show eia232 interface dtedce
Returns current RS-232 DTE/DCE Physical Port setting.
Accessibility:
READ ONLY
show eia232 interface flowcontrol
Returns current RS-232 Flow Control setting.
Accessibility:
READ ONLY
show eia232 interface inactiveto
Returns the current Inactive Timeout setting (in minutes) for closing an
inactive connection to the serial interface.
Accessibility:
READ ONLY
show eia232 interface ipaddactive
Returns the current active IP address for the serial interface.
Accessibility:
READ ONLY
Note In Telnet and RawTCP modes, the active serial interface IP
address will be the same as the 2120 unit IP Address configured
with the "configure system ipaddrcfg X" command or obtained
by an active DHCP Server on the LAN. In PPP mode, the active
serial interface IP address will be the same as the static IP
address configured with the "configure eia232 interface ipad-
drcfg X" command, obtained by an active PPP related DHCP
Server, or obtained from a remote PPP client. In SLIP mode,
the active serial interface IP address will be the same as the
static IP address configured with the "configure eia232 interface
ipaddrcfg X" command.
show eia232 interface ipaddrcfg
Returns the static IP address configured for PPP or SLIP operations.
Accessibility:
READ ONLY