Filter
Top Products
55
EIA232 Connection Closure
The "eiaconclose" allows an administrative user to manually disconnect
or close a user connection on the Model 2120 serial interface. The fol-
lowing illustrates how to issue the "eiaconclose" command:
TS> eiaconclose<Enter> (or "e<Enter>")
EIA connection close complete!
Ping
The "ping" command allows connectivity to be tested between the Model
2120 and a remote IP device. The following illustrates using the "ping"
command:
TS> ping <IP address of remote device><Enter>
OR "p <IP address of remote device><Enter>"
pinging ...
Reply from <IP address of remote device>: bytes=64 SN=0
TTL=128 time<10msec
Reply from <IP address of remote device>: bytes=64 SN=1
TTL=128 time<10msec
Reply from <IP address of remote device>: bytes=64 SN=2
TTL=128 time<10msec
Reply from <IP address of remote device>: bytes=64 SN=3
TTL=128 time<10msec
Reply from <IP address of remote device>: bytes=64 SN=4
TTL=128 time<10msec
Reply from <IP address of remote device>: bytes=64 SN=5
TTL=128 time<10msec
Reply from <IP address of remote device>: bytes=64 SN=6
TTL=128 time<10msec
Reply from <IP address of remote device>: bytes=64 SN=7
TTL=128 time<10msec
Reply from <IP address of remote device>: bytes=64 SN=8
TTL=128 time<10msec
TS>