Patton electronic 2120 Security Camera User Manual


 
66
Accessibility:
READ/WRITE
Default:
UNDEFINED (no entry)
Valid Entries:
Any alphanumeric entry with a string size up to 32 bytes
configure eia232 rawtcp_telnet remuserid
X
Sets/activates the User ID sent with automatic connection requests to a
remote device/application over the LAN.
Accessibility:
READ/WRITE
Default:
UNDEFINED (no entry)
Valid Entries:
Any alphanumeric entry with a string size up to 32 bytes
configure eia232 rawtcp_telnet sestermchar X
Sets character string that is required to terminate a connection to the
serial interface.
Accessibility:
READ/WRITE
Default:
0x04 (Control-D)
Valid Entries:
Hexadecimal entry for desired session termination character.
configure eia232 rawtcp_telnet uicmdena X
User Interface Command Enable
configure ipfwd ipfwdena X
IP forwarding enable
configure ipfwd natipaddr X
NAT IP address
configure resetnv
Performs a software reset (to factory defaults) of all non-volatile configu-
ration parameters. When performed, session is lost.
Accessibility:
N/A
Default:
N/A
Valid Entries:
N/A
Note Will not reset factory assigned MAC/NIC address, but will reset
the IP address.
configure system
Returns the Configure System Help Menu.
Accessibility:
N/A
Default:
N/A
Valid Entries:
N/A
Note Needs to be entered first in all “configure system” command
strings.
configure system bootmessdispena X
Permits the display of the Boot Message (Model 2120 Terminal Server
Software Version ?.?.?) on the serial interface.
Accessibility:
READ/WRITE