Filter
Top Products
59
APPENDIX B
MODEL 2120 SINGLE PORT TERMINAL SERVER
SOFTWARE COMMAND DEFINITIONS
In the commands defined below,
X
= Valid entry/setting for that configu-
ration parameter.
Note Contact your Network Administrator if you have questions
regarding configuration parameters required for your application
and/or LAN.
B.1 ACTIVATE IMAGE COMMANDS
activateimage
Activates software downloaded to 2120 via FTP. Once new software is
activated, session is lost.
Accessibility:
N/A
Default:
N/A
Valid Entries:
N/A
Note Command will not work unless SW has been downloaded to
unit.
B.2 BOOT COMMANDS
boot
Remotely performs a soft boot of the 2120. When performed, session is
lost.
Accessibility:
N/A
Default:
N/A
Valid Entries:
N/A
B.3 CONFIGURE COMMANDS
configure
Returns the Configure Help Menu.
Accessibility:
N/A
Default:
N/A
Valid Entries:
N/A
Note Needs to be entered first in all “configure” command strings.
configure activate
Activates/writes changes in configuration parameters permanently in
Flash memory of the 2120.
Accessibility:
N/A
Default:
N/A
Valid Entries:
N/A