Filter
Top Products
20
3.3 DEFAULT CONFIGURATION PARAMETERS
The Model 2120 software is pre-configured with the following factory
default settings.
EIA232 Interface Defaults
• Character Length:
8
(bits)
• Datarate:
9600
(bits per second)
• DTE/DCE Physical Port:
DCE
• Flow Control:
none
• Inactive Timeout:
15
(minutes)
• Serial Interface IP Address:
5.5.5.5
• Parity:
none
• Serial Interface Protocol:
Telnet
• Stop Length:
1
(bits)
• Serial Interface Subnet Mask:
255.255.255.0
PPP Defaults
• PPP DHCP Enable:
no
• Peer IP Address Use Enable:
no
• Peer Name Server Address Use Enable:
no
• Primary DNS Address:
0.0.0.0
• Primary WINS Address:
0.0.0.0
• Secondary DNS Address:
0.0.0.0
• Secondary WINS Address:
0.0.0.0
• User Authentication Protocol:
none
RawTCP/Telnet Defaults
• Connection From Local Enable:
no
• Connection From Remote Enable: yes