Filter
Top Products
31
EIA232 Interface Settings
Character Length: 8 (or setting required by serial device)
Datarate: 9600 (or setting required by serial device)
DTE / DCE Physical Port: dce (or setting required by serial device)
Flow Control: none (or setting required by serial device)
Inactive Timeout (min): 0
IP Address Configured: <Same as System IP Address>
Parity: none (or setting required by serial device)
Protocol: rawtcp
Stop Length: 1 (or setting required by serial device)
Subnet Mask Configured: <Same as System Subnet Mask>
EIA232 PPP Settings
DHCP Enable: no
Peer IP Address Use Enable: no
Peer Name Server Address Use Enable: no
Primary Domain Name Server Address: 0.0.0.0
Primary Windows Name Server Address: 0.0.0.0
Secondary Domain Name Server Address: 0.0.0.0
Secondary Windows Name Server Address: 0.0.0.0
User Authentication Protocol: none
EIA232 Raw-TCP/Telnet Settings
Connection From Local Enable: yes
Connection From Remote Enable: yes
Connection Retry Frequency (sec): <Preferred connection retry set-
ting>
Local Port: 404 (or required setting)