Filter
Top Products
9
• DHCP:
– DHCP enable/disable for static or dynamic IP addressing of the unit
– Permit the use of the DHCP offered IP address in the IP address
destination field
– DHCP Client support for Default Gateway
IP Forwarding/NAT
• Ability to forward IP packets from multiple Ethernet devices across its
serial interface in both SLIP and PPP mode
• NAT support for a single device connected on the Ethernet interface
when IP Forwarding is enabled
• FTP/Port command support when NAT is enabled
• NAT algorithm conforms to RFC 1624
Raw TCP/TELNET
• Permits automatic connection request to a remote device
• Permits incoming connection requests from remote devices on the
serial interface
• Selectable frequency (in seconds) of the automatic connection
requests to remote device
• Selectable TCP port number for serial interface
• Selectable destination IP address for sending automatic connection
requests to a remote device
• Selectable TCP port number for sending automatic connection
requests to a remote device
• Optional User ID & Password capability when sending automatic con-
nection requests to remote device
• Selectable serial interface session termination character
• Flexible Telnet session NVT configuration
• Serial Port TCP Inactivity Support
• Ability to specify TCP port number for the user interface