Patton electronic 2120 Security Camera User Manual


 
78
show system all
Returns all current System settings.
Accessibility:
READ ONLY
show system bootmessdispena
Returns current Boot Message Display Enable setting.
Accessibility:
READ ONLY
show system defgatewayactive
Default Gateway Active
show system defgatewaycfg
Default Gateway Configured
show system dhcpena
Returns current DHCP Enable setting.
Accessibility:
READ ONLY
show system dhcpstate
Returns current DHCP client state.
Accessibility:
READ ONLY
Default:
select
Possible States:
bound, initialize, rebind, renew, request, select
Note The bound state should appear when DHCP is successfully
operating.
show system dhcppassedtime
Returns the amount of time (in seconds) since the lease on the IP
address started.
Accessibility:
READ ONLY
Default:
0 (seconds)
Possible Values:
0–65535
show system dhcprenewtime
Returns when (in seconds) the lease on the current IP address must be
renewed.
Accessibility:
READ ONLY
Default:
0 (seconds)
Possible Values:
0–65535
show system dhcprebindtime
Returns when (in seconds) rebind must occur between the IP and MAC
address.
Accessibility:
READ ONLY
Default:
0 (seconds)
Possible Values:
0–65535