Filter
Top Products
23
7. Before proceeding with the configuration of the Model 2120 for your
application, it is suggested that the following "show all" commands
be executed in order to view the current system, eia232, and user
database configuration parameters:
TS>show system all<Enter> (or "s s a<Enter>")
Boot Message Display Enable : yes
Default Gateway Active : 0.0.0.0
Default Gateway Configured : 0.0.0.0
DHCP Enable : yes
DHCP State : initialize
DHCP Passed Lease Time (sec) : 0
DHCP Renew Lease Time (sec) : 0
DHCP Rebind Lease Time (sec) : 0
DHCP Expire Lease Time (sec) : 0
DHCP IP Address : 0.0.0.0
DHCP Subnet Mask : 0.0.0.0
DHCP Default Gateway : 0.0.0.0
Help Menu Display Enable : yes
IP Address Active : 192.168.200.1
IP Address Configured : 192.168.200.1
MAC Address : 0x00A0BA000D95
Management Enable : yes
Management Inactive Timeout (min) : 15
Management Port : 23
Prompt : TS>
Subnet Mask Active : 255.255.255.0
Subnet Mask Configured : 255.255.255.0
Software Version : 4.0.19
TS>show eia232 interface all<Enter> (or "s e i a<Enter>)
Character Length : 8
Current User Logged : (UNDEFINED)
Datarate : 9600
Default Gateway Active : 0.0.0.0
Default Gateway Configured : 0.0.0.0
DTE / DCE Physical Port : dce
Flow Control : none
Inactive Timeout (min) : 15
IP Address Active : 192.168.200.1
IP Address Configured : 8.8.8.8
Parity : none
Protocol : telnet
Receive Buffer Length (num char) : 1
Receive Idle Char For Trig (num char) : 1
Stop Length : 1
Subnet Mask Active : 255.255.255.0
Subnet Mask Configured : 255.255.255.0