Filter
Top Products
Switching the sound
muting/attenuation
You can select the muting method when the
voice guidance is output.
p When you use a cellular phone connected
with Bluetooth technology (dialing, talking,
incoming call), the audio source volume is
always muted independently of this setting.
1 Display the “Initial Setting” screen.
= For details, refer to Displaying the
“Initial Setting” screen on page 124.
2 Turn MULTI-CONTROL to select
“Guidance”.
3 Press the center of MULTI-CONTROL re-
peatedly until the desired setting appears
in the display.
Each press of MULTI-CONTROL changes the
settings as follows:
! ATT:
The audio source is attenuated automati-
cally when the voice guidance is output.
! Mute:
The audio source is muted automatically
when the voice guidanceis output.
! Normal:
The audio source volume does not change.
p AV source volume returns to normal when
the corresponding action is ended.
Displaying the
“Audio Menu” screen
To customize the audio settings, display the
“Audio Menu” screen.
1 Press the MODE button when the map
of the current location is displayed.
The audio operation screen appears.
2 Press the center of MULTI-CONTROL to
display the function select screen.
= For details, refer to Audio screen switching
overview on page 80.
3 Turn MULTI-CONTROL to select
“Audio Menu”.
4 Press the center of MULTI-CONTROL.
The “Audio Menu” screen appears.
1 234
1 Source icon
Shows which source has been selected.
2 Screen title
3 Function currently selected
4 Setting value
5 Turn MULTI-CONTROL to select one of
the initial settings.
Turning MULTI-CONTROL switches between
the functions in the following order:
Fader (balance adjustment) —
Preset Equalizer (equalizer adjustment) —
P.EQ Setting1 (equalizer band and the level of
equalizer band) — P.EQ Setting2 (frequency
and Q factor) — Loudness (loudness) — Sub-
Woofer1 (phase of subwoofer output) — Sub-
Woofer2 (subwoofer setting) — Bass Booster
(bass booster) — HPF (high pass filter) — SLA
(source level adjustment)
p When “Rear SP:F.Range” is selected in
“S/W Control” and “Rear” is selected in
“Preout”, “SubWoofer1” cannot be ad-
justed.
p When “SubWoofer1” is turned off, “Sub-
Woofer2” cannot be adjusted.
p You cannot select “SLA” when the FM tuner
is selected as the AV source.
Using balance adjustment
You can select a fader/balance setting that
provides an ideal listening environment in all
occupied seats.
p When “Rear SP:S/W” is selected in “S/W
Control”, front/rear speaker balance can-
not be adjusted.
En
126
Chapter
26
Customizing preferences