Filter
Top Products
Messages and how to react to them
The following messages may be displayed by your navigation system. Refer to the table below to
identify the problem, then take the suggested corrective action.
There are occasions when you may see error messages other than those shown here. In such a
case, follow the instructions given on the display.
Messages in the procedures for updating
Message When What to do
An error occurredand the up-
date failed.
Unexpected error occurred in the
update process.
Consult your local Pioneer dealer if this mes-
sage persist.
Messages for navigation functions
Message When What to do (Reference)
Preparing to start upsystem...
please wait.
When the navigation system starts,
the message is displayed if there-
maining battery power of the de-
tachable device is low.
! Wait until the message “Ready to startup
system.” appears. After the message is dis-
played, the navigation system restarts.
! Consult the nearest authorizedPioneer ser-
vice station if this message persists.
Dataloading failed. Youmay have transferred the data
from your cellular phone ina format
cannot be received by thenaviga-
tion system.
! Select a suitableitem and format, then
retry. (Page 73)
! Connect your cellular phonewith another
method again and retry.(Page 59)
Application startup failed.
Check file on SDcard. Press
“OK” to exit Application
Mode.
The application is not storedon the
SD memory card.
Use the utility program AVIC FEEDS to con-
firm the proper solution.
The application failed to download
properly.
Use the utility program AVIC FEEDS to con-
firm the proper solution.
A file required forapplication start-
up is not storedon the SD memory
card or is damaged.
Use the utility program AVIC FEEDS to con-
firm the proper solution.
The SD memory card is damaged. Make sure there are noproblems with the SD
memor y card.
Messages for audio functions
= For details,refer to the Operation Manual for AVIC-U310BT.
En
139
Appendix
Appendix
Appendix