Pioneer CNSD-130FM Camera Accessories User Manual


 
Storing and recalling
broadcast frequencies
With a touch of any of the preset tuning keys
to , you can easily store up to six broad-
cast frequencies for later recall (also with the
touch of a key).
1 When you find a frequency that you
want to store in memory, keep touching a
preset tuning key
to until the preset
number (e.g., P.CH1) stops flashing.
The selected radio station has been stored in
memory.
p Up to 18FM stations, six for each of the
three FM bands, as well as six AM stations,
can be storedin memory.
2 Touch the same preset tuning key to
.
The radio station frequencies are recalled from
memory.
Using the function menu
1 Display the Function Menu screen.
= For details of the operation, refer to Display-
ing the Function Menu screen on page
81.
2 Turn MULTI-CONTROL to select a func-
tion.
Turning MULTI-CONTROL switches between
the functions in the following order:
BSM (best stations memory) Local (local
seek tuning)
Storing the strongest
broadcast frequencies
BSM (best stations memory) lets you auto-
matically store the six strongest broadcast fre-
quencies under the preset tuning keys
to
and, once stored there, you can tune in to
these frequencies with the touch of a key.
1 Display the Function Menu screen.
= For details of the operation, refer to Display-
ing the Function Menu screen on page
81.
2 Turn MULTI-CONTROL to display
BSM.
3 Press the center of MULTI-CONTROL to
begin a search.
Searchingbegins to flash. While Search-
ing is flashing, the six strongest broadcast
frequencies will be stored under the preset
tuning keys
to in order of their signal
strength. When this is complete, Searching
stops flashing.
p To cancel the storage process,press the
center of MULTI-CONTROL again.
p Storing broadcast frequencies with BSM
may replace broadcast frequenciesyou
have already saved by using
to .
Tuning in strong signals
Local seek tuning allows you to tune in only
those radio stations with sufficiently strong
signals for good reception.
1 Display the Function Menu screen.
= For details of the operation, refer to Display-
ing the Function Menu screen on page
81.
2 Turn MULTI-CONTROL to display
Local.
3 Press the center of MULTI-CONTROL.
Each press of the center of MULTI-CONTROL
switches the setting between on and off.
4 Press MULTI-CONTROL left or right to
set the sensitivity.
! FM: Level 1 Level 2 Level 3
Level 4
! AM: Level 1 Level 2
p The highest level settingallows reception of
only the strongest stations, while lower set-
tings let you receive weaker stations.
En
83
Chapter
16
Using the radio (TUNER)
Using the radio (TUNER)