Filter
Top Products
ŝ162Ş
Using the Menu
5. Use the four-way controller (Ɗ) to select [Mirror Up].
6. Press the OK button.
- The mirror is locked in the up position.
7. Clean the CCD.
- Use a brush-less blower to remove dirt and dust from the
CCD. Using a blower with a brush may scratch the CCD.
Do not wipe the CCD with a cloth.
8. Turn the camera off.
9. Attach the lens after the mirror returns to its original position.
SETUP MENU
: Set : Back
Sensor Cleaning
Mirror Up
Cancel
Mirror up to clean CCD
Turn the power off to end