Samsung GX-10 Digital Camera User Manual


 
ŝ205Ş
ƈ AE Lock is a function that memorizes the exposure prior to taking the picture. Use this when the
subject is too small or backlit and a proper exposure setting cannot be obtained.
1. Press the AE-L button.
- The camera memorizes the exposure (brightness) at that
instant. Press it again to unlock.
ƃ is displayed in the viewfinder while the AE lock is engaged. (p.27)
ƃ The exposure remains in memory for twice as much time as the metering timer after releasing the
AE-L button. The exposure remains locked as long as the AE-L button is kept pressed or the
shutter release button is kept pressed halfway.
ƃ You will hear a beep when the AE-L button is pressed. The beep can be turned off. (p.151)
ƃ AE lock is not available when the exposure mode is (Auto), B (Bulb) or X (Flash synchro)
mode.
ƃ The combination of shutter speed and aperture value changes depending on the zooming
position even while the AE lock is engaged when using a zoom lens for which maximum aperture
varies depending on the focal length. However, the exposure value does not change and the
picture is taken at the brightness level set by the AE lock.
ƃ If the exposure mode is M (Manual), the aperture and/or shutter speed are automatically adjusted
to set the appropriate exposure when the Green button is pressed.
ƃ Exposure can be fixed when focus is locked. Set in [AEL with AF Locked] in the [CUSTOM1
MENU] menu. (p.134)
INFORMATION
Recording the Exposure Before Shooting (AE Lock)
Setting the Exposure