Filter
Top Products
ŝ178Ş
Using the Mode Dial
ƃ Turn the front e-dial while pressing the button to change the EV Compensation value.
ƃ Set the shutter speed in increments of 1/2 EV or 1/3 EV. Set in [EV Steps] in the [CUSTOM1
MENU] menu. (p.133)
ƃ You can automatically correct the sensitivity if appropriate exposure cannot be set with the set
criteria. Set [ISO Sensitivity] to [Auto] in the Fn menu. (p.82)
ƃ Set the aperture to the A position while holding down the auto-
lock button when using a lens with an aperture ring.
INFORMATION
Exposure Warning
If the subject is too bright or too dark, the aperture value will
blink in the viewfinder and on the LCD panel. If the subject is
too bright, choose a faster shutter speed. If it is too dark,
choose a slower shutter speed. When the aperture value indication stops blinking, you can take
the picture with proper exposure. Use an ND (Neutral Density) filter if the subject is too bright.
Use a flash if it is too dark.