Filter
Top Products
ŝ184Ş
Using the Mode Dial
Exposure Warning
If the subject is too bright or too dark, “+” or “-” in the EV bar will
blink in the viewfinder and on the LCD panel. Use an ND
(Neutral Density) filter if the subject is too bright.
Use a flash if it is too dark.
AE-L in M mode
Press the AE-L button to record the exposure value in M (Manual) mode. If the shutter speed or
aperture is then changed, the combination of shutter speed and aperture changes while exposure
is retained.
Example) If the shutter speed is 1/125 sec and aperture is F5.6 and is recorded with the AE-L
button, and the shutter speed is changed to 1/30 sec with the front e-dial, the aperture
automatically changes to F11.
ƈ The EV bar appears in the LCD panel and viewfinder in M (Manual)
mode. The appropriate exposure is set when V is in the middle of
the EV bar. If it is towards -, it is underexposed.
If it is towards +, it is overexposed.
If the value exceeds the range of the EV bar, the “+” or “-” blinks.
EV Bar