Filter
Top Products
ŝ245Ş
Troubleshooting
* In rare cases, the camera may not operate correctly due to static electricity. This can be remedied by
taking the batteries out and putting them back in again. When the mirror remains in the up position,
take the batteries out and put them back in again. Then, turn the power on. The mirror will retract.
After the procedure is done, if the camera operates correctly, it does not require any repairs.
* Refer to the software instructions for details on connecting the camera to a PC. (p.218)
Problem Cause
Remedy
Shake
Reduction
does not work
Move away from the subject, or turn off the Shake
Reduction function and use a tripod.
Subject is too close