Filter
Top Products
ŝ70Ş
Using the Built-in Flash
ƈ If you wish to discharge the flash in a dark or backlit location, press the Flash Pop-up button to pop up
the flash. Select a flash mode to suit your purpose from the Flash options screen in the Fn menu.
You can adjust the flash output with the rear e-dial in any Exposure mode other than Auto mode.
The built-in flash is optimum from about 0.7 m to 4 m from the subject.
Exposure will not be properly controlled and vignetting may occur when used at a distance closer
than 0.7 m (this distance varies slightly depending on the lens being used and set sensitivity).
ſ Compatibility of built-in flash and lens
Vignetting (darkening of the corners of the image due to a lack of light) may occur depending on the
lens being used and the capture conditions. We recommend taking a test shot to confirm this.
Discharges the flash automatically in dark or backlit locations.
The built-in flash discharges manually. When the pop-up flash is
closed, the flash doesn’t discharge. When the flash is opened, the
flash will discharge.
Lights a red-eye reduction light before automatic flash.
The built-in flash discharges manually. Lights a red-eye reduction
light before manual flash.
Sets the shutter speed to capture the background clearly.
Sets the shutter speed to capture the background clearly and also
lights a red-eye reduction light before automatic flash.
Discharges flash immediately before closing the shutter curtain.
Auto discharge
Fill-in Flash
Fill-in Flash+Red-eye
Slow-speed sync
Auto flash+Redeye reduct
Slow-speed sync+Red-eye
ƃ When using the built-in flash, remove the lens hood before shooting.
ƃ The built-in flash fully discharges for lenses without a function to set aperture lens ring to A (Auto).
INFORMATION
Trailing curtain sync