Sigma LBA-300 Digital Camera User Manual


 
Figure 17
The user can assign certain of these capture control items to the Capture Toolbar. The assigned
items will appear on the toolbar in essentially the same order that they are listed in this dialog box.
The operation of each item from the Toolbar is identical to their operation from this dialog box. For
simplicity, the following examples will refer only to the dialog box entries. Toolbar switch icons will be
included in the titles when they exist.
3.2.4.1 Capture
The Capture panel controls how imaged data is to be acquired and saved into the frame buffer.
You must first choose a capture Method, then subsequent selections need to be made. The
capture Methods are:
Continuous: Configures the LBA to continuously acquire new frames of video images
from the frame grabber card as fast as possible, or at a rate determined by the value set
in the Interval edit control. (See 3.2.4.2)
Single Shot: Choose if you only want to acquire a single frame of video from the frame
grabber card. Each time you click on Start!, the frame grabber will capture one video
Operator’s Manual LBA-PC
58