Filter
Top Products
Step4: Making setting adjustmentsbefore
recording
Open the LCD panel 90 degrees to the
camcorder/@), then rotate it to the best
angle to record or play/@/.
DISPLAY/BATT INFO
180 degrees
(max.)
@
@ 90 degrees to Ihe
9(1 degrees camcorder
( III{IX d
To turn off the LCD backlight to make
the battery last longer
Press :rod hohl DISPLAY/BATT INFO for
a few seconds until "g-do_Fappears.
This setting is practical when you use your
camcorder in bright conditions or where
you want to save battery power. The
recorded picture will not be affected by the
setting. To turn on the LCD backlight, press
and hold DISPLAY/BATT INFO for a few
seconds until _E"d_disappears.
0 Notes
• Do not press the buttons on the LCD pmlcl
accidentally when you open or adjust the LCD
panel.
"_° Tips
• [t you rotate tile LCD panel 180 degrees to the
lens side, you can close the LCD panel with the
LCD screen ti_cing ()tit. This is convenienl
during playback operalions.
• See [LCD/VF SETI - [LCD BRIGHTI/P- 58) to
Miusl tile brightness of tile LCD screen.
• Press DISPLAY/BATT INFO to loggle lhe
screen illdicalors (Stlch as Batlery [IIIL)) O11 or
oil.
¸:I
You can view pictures using the viewfinder
to avoid wearing down the battery, or when
the picture seen on the LCD screen is poor.
Viewfinder
lens
adjustment lever
Move it until the
picture is clear.
"_i° Tips
• You can adjust the brighmess ot tile viewfinder
backlighl by selecting [LCD/VF SETI - [VF
B.LIGHT] (p. 58).
Fasten the grip belt and hold your
camcorder correctly.
18