Filter
Top Products
gANERA SET mesh (Co_ti_e_}
46
(2) Touch [MANUAL].
appears.
@ Touch _ (l_)cusing on close subjects)/
[7_] (l_)cusing on distant subjects) to
sharpen Ihe focus. _ appears when the
focus cannot be adjusted any closer, and t_
appears when the focus cannot be a({justed
farther away.
Ifyou touch [7_], _too appears, and you
can adjust the focus to infinity.
@ Touch Fogl.
To adjust the focus automatically, touch
]AUTOI-+ [U_.
(b Notes
• The minimum possible distance betwecn
camcorder and subject while nlaintaining sharp
locus is about I cm (about 13132 in.) lot wide
angle and about 80 cm (about 2 518Jcet) lbr
telepholo.
"_° Tips
• It is easierto ti)cusonthesut_iectbyIno_ingfile
power zoomlever towards T (telephoto)to
adjuslthelbcus, then towardsW (wideangle)to
a_/iusltile zoom l_l"recording. When you wanl
1o record a stlbject at clo_ range, nlove tile
pow-erzoonl levmto W (wideangle), then
adjuslthelk_cus.
• You canalso adjustthe lbcus nlanually using
lheCAM CTRLdial (p. 26).
This is useful to shoot small subjects, such
as flowers or insects. You can blur out
backgrounds and the subject stands out
clearer.
When you set [TELL MACRO] to ]ONI
/T_), the zoom/p. 25) moves to the top of
the T/Telephoto) skle automatically and
allows lklrrecording subjects at a close
distance down to about 45 cm (17 3/4 in.).
To canceh touch [OFF], or zoom to wide-
angle/W side).
(b Notes
• When =x_cordinga distantsubject,ti_cusingmay
bediflicuh and can takesome tinle.
• Adjust the Rlcusmanually ([FOCUSI,p. 45)
when it ishard1oli)cus automatically.
The outline of the subject on the screen is
enhanced l\_reasier focusing. You can set
the outline color displayed on the screen
during peaking. If you change the default
setting, P_ is displayed on the screen.
OFF
Do not set this function.
WHITE
Makes the outline color white.
RED
Makes the outline color red.
YELLOW
Makes the outline color yellow.
"_°Tips
• Tile peaking is not recorded on tile tape.
You can set this 15motion whetl you use the
builtqn flash or an external flash (optional)
that is compatible with yottr camcorder.
N FLASHLEVEL
HIGH(_+)
Makes the flash level higher.
NORMAL(_)
LOW(_-)
Makes the flash level lower.