Filter
Top Products
Trssb_sshsstisS/Ssstisssd)
• There is a blank section between recorded
sections of the tape. This is not a
malfimction.
No picture appears during [END
SEARCH] or Rec Review.
• The tape was recorded in both HDV and
DV lbrmats. This is not a malfimction.
J_4ch-12bappears on the LCD screen.
• This appears when you play back a tape
recorded on other recording devices using a
4ch microphone (4CH MIC REC). This
camcorder does not comply with the 4ch
microphone recording standard.
You cannot view the picture on the
TV connected with the i.LINK cable.
• You cannot view the picture in the HD
(high definition) image quality on the TV
which is not compatible with the
HDV 1080i specification (p. 34). Reli:r to
the instruction manuals Sul)pliedwith your
TV.
• Down convert the pictures recorded in
HDV format to DV 12)rmatand play back ill
SD (standard definitionJ image quality
(p. 59).
• Play back pictures using another connecting
cable (p. 341.
You cannot view the picture or hear
the sound on the TV connected with
the component video cable.
• Set [COMPONENT] on tile
/STANDARD SET) menu according to the
requirements of the connected device
(p. 59).
• When you am using the component video
cable, make sure the red and white plugs of
the A/V connecting cable arc connected
(p. 34).
You cannot view the picture or hear
the sound on the TV connected with
the HDMI cable.
• Pictures in the DV format are not output
fiom the HDMI OUT jack, if copyright
protection signals are recorded in the
pictures.
• DV format pictures input to the camcorder
via i.LINK cable (p. 67) cannot be output.
• This occurs if you record on a tape in both
HDV and DV formats. Disconnect and
conneel the HDMI cable, or slide the
POWER switch to turn on your camcorder
again.
The picture appears distorted on a
4:3 TV.
• This happens when viewing a picture
recorded ill the 16:9 (wide) mode on a 4:3
TV. gel [TV TYPE] on the
(STANDARD SET) metal (p. 59) and play
back the picture.
Black bands appear at the top and
bottom on a 4:3 TV.
• This happens when viewing a picture
recorded in 16:9 (wide) mode on a 4:3 TV.
This is not amalflmction.
Pictures from connected devices
cannot be zoomed.
• You cannot zoom pictures from connected
devices on your camcorder (p. 301.
Time code and other information
appear on the display of the
connected device.
• Set [DISP OUTPUTI to [LCD PANELI
while connected with an A/V connecting
cable (p. 611.
84