Filter
Top Products
gubbi_ t+ VSB +r gVNHgg recorders(g+_ti_Be_}
3 Connect your recording device
(VCR or DVDrHDD recorder) to
your camcorder.
See page 64 lot connection details.
,4
€-I.Start playback on your
camcorder, and recording on the
recording device.
Refer to the operating instructions
supplied with your recording device for
details.
5 When dubbing is complete, stop
your camcorder and the
recording device.
• Whcn dubbing to a DVD recorder from your
camcorder d/rough an i.LINK cable, you may
noI operate your C_llllcorder on your DVD
recorder even if its instruction manual says you
can,
It you can set tile input mode to HDV or DV on
your DVD recorder and can input/output
pictures, lollow tile sleps in "Dubbing to another
device."
• Whcn you use an i.LINK cable, tile video and
sound signals are transmittcd digitally,
producing lligh quality picmrc_,.
• When an i.LINK cable is connected, the lPrmat
ol the output signal (HDVouT _ or DVouT
) will be indicated on the LCD screen oi
your canlcorder.
66
0 Notes
• when connecting with an A/V connecting cable,
_t [TV TYPE] according to tile pl+@_ack
de_ ice/TV, etc.) (p. 59).
• To record tile data/time and camera sellings data
whcn connected by tile A/V connecting cable,
display them on the screen (p. 60).
• The lbllowing cannot be outpul via the _ HDV/
DV interlhcc/i.LINK):
Indicators
Pictures edited with [PICT.EFFECTI (p. 54)
or [D.EFFECT] (p. 53)
Titles that arc recorded onother camcoMers
• Pictures recorded in file HDV lbrmat are not
output lrolll the _ HDV/DV Interlace (i.LINK)
during playback pau_ or in any playback mode
()tiler Itlan normal playback.
• Note the li_llowing wllen connecting with an
i.LINK cable:
The recorded picture becomes rough when a
picture is paused on your cumcorder while
recording to a VCR or DVD/HDD recorder.
Data codes (date/time/camera settings data)
may not be displayed or recorded depending
on the dcvice or application,
go/i CallnOt record Ihe picture and SOllnd
separalely.