Filter
Top Products
3
Chapter 3 Recording and Playback3-34
18 To end the menu operation, set the MENU ON/OFF switch to OFF.
The menu disappears from the viewfinder screen and the message
“AUTO INTERVAL **M**S” indicating auto Interval Rec mode
appears along the bottom of the viewfinder.
**M**S indicates the shooting interval. For example, when TAKE
TOTAL TIME is set to 1H and REC TIME is set to 30 SEC, the
message “AUTO INTERVAL 00M04S” appears. The shooting
interval is 4 seconds.
The display indicating the current status of the camcorder appears
along the top and bottom of the viewfinder.
Note
The settings for auto Interval Rec mode are maintained until changed.
However, if you switch off the camcorder power, auto Interval Rec mode
is cleared except for the TAKE TOTAL TIME and REC TIME settings.
To use the auto Interval Rec function again after switching on the power,
perform steps 1 to 6.
Camcorder operation in auto Interval Rec mode
Follow the procedure below to shoot and record the picture in auto
Interval Rec mode after turning on auto Interval Rec mode and making
the required settings.
1 After performing the basic procedure for shooting and recording,
following the instructions in “3-2-1 Basic Procedure” (page 3-6),
secure the camcorder so that it will not move.