Filter
Top Products
4
Chapter 4 Adjustments and Settings for Recording4-48
• ALL menu:
This menu contains all items of the OPERATION menu, PAINT menu,
MAINTENANCE menu, FILE menu and DIAGNOSIS menu.
• OPERATION menu:
This menu contains items for changing settings according to conditions
related to the subject when the camcorder is being operated.
• PAINT menu
This menu contains items for making detailed image adjustments while
using a waveform monitor to monitor the waveforms output by the
camera. Support of a video engineer is usually required to use this menu.
Although you can also use an external remote control panel or master
setup unit to set the items on this menu, this menu is effective when
using the camcorder by itself outdoors.
• MAINTENANCE menu
This menu contains items for performing camera maintenance
operations, such as changing the system or using infrequently used paint
items.
• FILE menu
This menu is for performing file operations, such as writing the reference
file.
• DIAGNOSIS menu
This menu enables you to confirm the VTR status or identify a failed
circuit board.
To return to the TOP menu
The following two methods are available:
• Point the arrow (t) to TOP on the right top on each page, then press
the MENU knob.
• Keep pushing the CANCEL/PRST / ESCAPE switch to the ESCAPE
side until the TOP menu appears.