Filter
Top Products
4
Chapter 4 Adjustments and Settings for Recording 4-111
b) Even when MARKER is set to OFF on the MARKER page of
the USER menu, the ASSIGN 1 switch allows you to display or
not to display all markers.
c) EZ FOCUS
When EZ FOCUS is set to ON, the iris stays open and the video
level is automatically adjusted to the proper level by the
electronic shutter when an excessive amount of light passes
through the lens. The depth of field is shallow because the iris
stays open, and it is easy to check whether the object is in clear
focus.
Pressing the switch again sets the EZ FOCUS function to OFF.
This function automatically returns to OFF about 10 seconds
after being set to ON.
d) Even if RETURN VIDEO is set to OFF on the GENLOCK page
of the MAINTENANCE menu, you can use this switch to
display the image of the return video signal on the viewfinder.
Functions to be assigned to the ASSIGN 2 (slide-type) switch
Function Content
OFF Disables the switch.
F.MIC MONO STEREO Assigns the monaural/stereo switch
function when the stereo microphone is
connected to the MIC IN connector.
LOOP REC ON/OFF Assigns the Loop Rec mode ON or OFF
function.
TEST OUT CHARACTER
Assigns the function to switch whether or
not the characters are mixed to the video
signal to be output from the TEST OUT
connector.
MARKER Assigns the ON/OFF function to display all
markers.
a)
a) Even when MARKER is set to OFF on the MARKER page of
the USER menu, the ASSIGN 2 switch allows you to display or
not to display all markers.
(Continued)