Filter
Top Products
Chapter 6 Maintenance
6
6-15
Refitting the eyepiece
1 Align the match mark on the eyepiece locking ring with that on the
viewfinder barrel.
2 Align the match mark on the end of the eyepiece (see step 2 in
“Detaching the eyepiece” on the previous page) with that of the
eyepiece locking ring, then insert the eyepiece into the viewfinder
barrel.
3 Turn the eyepiece locking ring clockwise until its “LOCK”
indication arrow points to the match mark on the viewfinder barrel.
Fog-proof filter
Depending on the temperature and humidity, the protecting filter may
mist because of vapor or your breath. To ensure that the viewfinder is
always clear, replace the protecting filter with a fog-proof filter (Part No.
1-547-341-11, not supplied).
Fitting the fog-proof filter
Replace the protecting filter on the packing ring with the fog-proof filter.
Be sure to correctly assemble the fog-proof filter, the packing ring, and
the eyecup so that the reassembled eyepiece is waterproof.
Note
When cleaning the fog-proof filter, wipe it very gently with a soft cloth
to avoid impairing the anti-fogging coating.