Filter
Top Products
Menu List
101
Chapter 6 Menu and Detailed Settings
Marker
Makes settings related
to marker display in the
viewfinder screen.
Setting On/Off Turns all markers on or off.
Center Marker 1/2/3/4/Off When the center marker is
displayed, selects the type. Select
Off if you do not want to display the
marker.
Center H Position –40 to 0 to 40 Specifies the horizontal position of
the center marker.
Center V Position –40 to 0 to 40 Specifies the vertical position of the
center marker.
Safety Zone On/Off Turns the safety zone display on or
off.
Safety Area 80%/90%/92.5%/95% Selects the safety zone range.
Aspect Marker Line/Mask/Off When an aspect marker is to be
displayed, selects the display
method. Select Off if you do not
want to display the marker.
Line: Show as white lines.
Mask: Display by lowering the
video signal level of areas
outside the marker range.
Aspect Select 15:9/14:9/13:9/4:3/
1.66:1/1.85:1/2.35:1/
2.4:1
Selects the aspect ratio of the
marker.
Aspect Mask 0% to 30% to 90% (10%
step)
When the Aspect Marker setting is
Mask, specifies the video signal
level of areas outside the marker
range as a percentage value relative
to the video signal level of areas
inside the marker range.
User Box On/Off Turns the box cursor display on or
off.
User Box Width 40 to 500 to 999 Specifies the box cursor width
(distance from the center to the left
and right edges).
User Box Height 70 to 500 to 999 Specifies the box cursor height
(distance from the center to the top
and bottom edges).
User Box H Position –479 to 0 to 479 Specifies the horizontal position of
the box cursor center.
User Box V Position –464 to 0 to 464 Specifies the vertical position of the
box cursor center.
Guide Frame On/Off Turns display of the guide frame on
or off.
OPERATION
Menu items Sub-item Settings Description