Filter
Top Products
Attaching the Viewfinder
34
Chapter 2 Preparations
2 Couple the viewfinder connector to the
VF connector (rectangular).
Detaching the viewfinder
You can detach the viewfinder by following the
attaching procedure in reverse order, but there is
an additional action to take: when detaching the
viewfinder from the fitting shoe, pull up the
stopper.
To adjust the viewfinder left-to-right position,
loosen the left-to-right positioning ring, and to
adjust the front-to-back position, loosen the front-
to-back positioning knob.
You can adjust the angle of the viewfinder.
To reverse the display (image/text indication)
vertically
The viewfinder can be rotated as much as 180
degrees toward the direction facing the subject.
When you do this, the picture and other
information displayed in the viewfinder appear
upside down. To restore the normal display, set
the MIRROR switch on the rear panel of the
viewfinder to B/T.
You can view the LCD screen inside the
viewfinder or its mirrored image by lifting up the
viewfinder barrel or the eyepiece.
This section describes how to lift up the
viewfinder barrel and detach it. The eyepiece can
also be lifted up and detached in the same way.
Adjusting the Viewfinder Position
VF connector (rectangular)
Viewfinder front-to-back positioning knob
Viewfinder left-to-right positioning ring
Adjusting the Viewfinder Angle
Lifting Up the Viewfinder Barrel
and Eyepiece
LCD screen