Filter
Top Products
Basic Setup Menu Operations
91
Chapter 6 Menu and Detailed Settings
PAINT Menu (see page 108)
MAINTENANCE Menu (see page 114)
FILE Menu (see page 125)
To display the setup menu
Set the MENU ON/OFF switch to ON, or press
the MENU button.
The camcorder enters menu mode and the menu
list appears on the screen.
A cursor appears over the first two characters of the
most recently used menu,
and the corresponding
menu item selection area appears to the right.
Example: When the cursor is positioned at the
OPERATION menu
Note
The setup menu cannot be used when the camcorder is in
focus magnification mode. Exit focus magnification
mode by pressing the assignable switch to which the
Focus Mag function has been assigned.
To make menu settings
1 Turn the MENU knob, or press the J or
j button, to move the cursor to the item
that you want to set.
A list of selectable menu items appears in the
menu item selection area to the right of the
icon.
2 Press the MENU knob or the SET
button.
The cursor moves to the menu item selection
area.
You can also move the cursor to the menu
item selection area by pressing the k
button.
PAINT
Switch Status
White
Black
Flare
Gamma
Black Gamma
Knee
White Clip
Detail(HD Mode)
Detail(SD Mode)
Aperture
Skin Detail
Matrix
Multi Matrix
V Modulation
Low Key Saturation
MAINTENANCE
White Shading
Battery
Audio
WRR Setting
Timecode
Essence Mark
Camera Config
Preset White
White Filter
Auto Iris2
Flicker Reduce
Genlock
ND Comp
Lens
Trigger Mode
Clock set
Language
Hours Meter
Ve rsion
FILE
All
Scene
Reference
Lens
Basic Setup Menu
Operations
Menu item selection area
Menu list