Filter
Top Products
Operation Warnings
147
Chapter 9 Maintenance
If a problem occurs when the camcorder is powered or is being operated, a warning is issued by various
visible and audible indicators. These visible and audible indicators are:
• Warning message (“A” in the “Layout of the table of warning messages” below)
• WARNING indicator (“B”), warning sound from the speaker and earphones (“C”), tally/REC indication
(“D”), and battery remaining indicator (“E”).
A warning message, and the REC indication appear on the viewfinder screen.
The volume of the warning sound can be adjusted with the ALARM knob. Set the ALARM knob to the
minimum position to suppress the sound.
Layout of the table of warning messages
• The operation of the WARNING indicator, the tally/REC indication, and the battery indicator is
represented by graphic symbols as follows.
: Continuous
: 1 flash/s
: 4 flashes/s
• The warning sounds are represented by graphic symbols as follows.
: Continuous beep
: 1 beep/s
Operation Warnings
A
WARNING indicator Warning sound Tally/REC Battery remaining
BC D E
Problem Operation in the recorder
module
Action to take
Media Near Full
WARNING indicator Warning sound Tally/REC Battery remaining
—
Problem Operation in the recorder
module
Action to take
Free space on the S×S
memory card has
become insufficient.
Recording continues. Replace it with another at the earliest opportunity.
Media Full
WARNING indicator Warning sound Tally/REC Battery remaining
—
Problem Operation in the recorder
module
Action to take
No space is left on the
S×S memory card.
Recording, clip
copying and clip
division cannot be
performed.
Recording stops. Replace it with another.