Filter
Top Products
Attaching the Viewfinder
36
Chapter 2 Preparations
To adjust the viewfinder focus
Turn the diopter adjustment ring until the
viewfinder image is sharpest.
To adjust the viewfinder screen
Adjust the brightness, contrast, and peaking of the
viewfinder screen with the controls shown below.
By fitting an optional BKW-401 Viewfinder
Rotation Bracket, you can rotate the viewfinder
out of the way so that your right leg does not hit
the viewfinder while you are carrying the
camcorder.
1 Loosen the front-to-back viewfinder
positioning levers and the front-to-back
viewfinder positioning knobs, and then
pull the viewfinder slide assembly
forward.
2 Using a 2.5 mm diameter hexagonal
wrench, detach the viewfinder slide
assembly.
3 Attach the BKW-401 with the supplied
bolts.
Adjusting the Viewfinder Focus
and Screen
Using the BKW-401 Viewfinder
Rotation Bracket
Diopter adjustment ring
1 PEAKING control
2 CONTRAST control
3 BRIGHT control
Bolts with
hexagonal
hole
Viewfinder slide assembly
Bolts supplied with the BKW-401