Filter
Top Products
Exchanging the Battery of the Internal Clock / Specifications
156
Appendix
The camcorder’s internal clock is powered by a
lithium battery. If the message “BackUp Battery
End” appears in the viewfinder, this battery must
be exchanged. Contact a Sony service
representative.
Exchanging the Battery
of the Internal Clock
Specifications
General
Power requirements
12 V DC (11 V to 17.0 V)
Power consumption
Approx. 17 W
Main unit (camcorder) + LCD viewfinder + auto
focus lens + microphone
During recording, power source: battery pack
Notes
• Do not use a video light with power
consumption of over 50 W.
• When connecting a device to the DC OUT
connector, use one with current consumption
of 0.5 A or more.
Operating temperature
0ºC to 40ºC (32ºF to 104ºF)
Storage temperature
–20ºC to +60ºC (–4ºF to 140ºF)
Recording/playback formats
Video
HD HQ Mode: MPEG-2 MP@HL, 35 Mbps/
VBR
1920 × 1080/59.94i, 50i, 29.97P, 25P,
23.98P
1440 × 1080/59.94i, 50P, 29.97P, 25P,
23.98P
1280 × 720/59.94P, 50P, 29.97P, 25P,
23.98P
HD SP Mode: MPEG-2 MP@H-14, 25 Mbps/
CBR
1440 × 1080 /59.94i, 50i
(23.98P is converted to 59.94i in 2-3 pull-
down processing.)
SD Mode: DVCAM
720 × 480/59.94i
720 × 576/50i
720 × 480/29.97P
720 × 576/25P