Filter
Top Products
223
Customising Your Camcorder Personnalisation du caméscope
Icon/item
OTHERS
DATA CODE
(On the Remote
Commander)
AREA SET
SUMMERTIME
BEEP
COMMANDER
DISPLAY
Meaning
To display date, time and various settings during
playback when you press DATA CODE on the Remote
Commander (p. 52)
To display date and time during playback when you
press DATA CODE on the Remote Commander
Temporarily change the area where you are using your
camcorder
Not during summer time
During summer time
To output the melody when you start/stop recording
or when an unusual condition occurs on your
camcorder
To output the beep instead of the melody
To cancel melody, the beep sound and shutter sound
To activate the Remote Commander supplied with
your camcorder
To deactivate the Remote Commander to avoid remote
control misoperation caused by other VCR’s remote
control
To show the display on the LCD screen and viewfinder
To show the display on the TV screen, LCD screen and
viewfinder
POWER
switch
Mode
z DATE/CAM
DATE
——
z OFF
ON
z MELODY
NORMAL
OFF
z ON
OFF
z LCD
V-OUT/LCD
Note
If you press DISPLAY/BATTERY INFO with DISPLAY set to V-OUT/LCD in the menu settings, the
picture from a TV or VCR will not appear on the LCD screen even when your camcorder is connected
to the output jacks on the TV or VCR.
(continued on the following page)
Changing the menu settings