Sony UP-CR20L Photo Printer User Manual


 
19
Loading the Paper Roll and Ink Ribbon
Chapter 2 Preparations
Be careful that your fingers and clothing are not caught
in the paper door or on the protuberance in the opening
of the door.
1
Press and lower the paper door lever, hold the paper
door at the center portion, and pull the door forward
until it locks into the open position.
2
Remove the paper core.
3
Insert the paper core into the paper roll.
The two sides of the paper core are the same shape.
You can insert either side.
If the edges of the paper on the roll are not aligned
before inserting the paper core, be sure to align them
while being careful not to bend or damage them. Not
doing so may result in malfunction.
If the leading edge of the paper is bent or damaged
as a result of a paper jam, for example, be sure to use
scissors to cut off the damaged portion, as shown,
before inserting the paper.
Do not bump the paper roll against hard objects or
squeeze it tightly. Doing so may bend or crease the
paper and affect print quality.
4
Depending on the width of your paper roll, attach or
remove the paper adapters.
Notes