Filter
Top Products
80
Specifications
Appendix
However the number of sheets that can be printed may not
be guaranteed if you replace the ink ribbon and paper
before the ink ribbon and paper run out.
Specifications
Power requirements
100 to 240 V AC, 50/60 Hz
Input current 6.3 to 3.2 A max. (while printing)
Operating temperature range
10 to 35 °C
Operating humidity range
20 to 80% (no condensation)
External dimensions
Approx. 338 × 442 × 454 mm (WHD)
(13
3
/
8
× 17
1
/
2
× 17
7
/
8
inches)
(excluding the maximum projecting
parts)
Mass Approx. 23 kg (50.71 lb) (printer only)
Printing system Dye sublimation thermal transfer
Thermal head 13.0 dot/mm, 2048 elements (330 dpi)
Gradations 8 bits each for yellow, magenta and cyan
Picture size 2UPC-R203 series: 89 × 127 mm ±2 mm
(3.5 × 5 inches ±
3
/
32
inches)
2UPC-R204 series: 102 × 152 mm
±2 mm
(4 × 6 inches ±
3
/
32
inches)
2UPC-R205 series: 127 × 178 mm
±2 mm
(5 × 7 inches ±
3
/
32
inches)
2UPC-C26/R206 series: 152 × 203 mm
±2 mm
(6 × 8 inches ±
3
/
32
inches)
Printable pixels 2UPC-R203 series:
1210 × 1728 dots
2UPC-R204 series:
1382 × 2048 dots
2UPC-R205 series:
1728 × 2380 dots
2UPC-C26/R206 series:
2048 × 2724 dots
(The top and bottom and right and left
portions will not be printed by about
2.5 mm.)
Printing time 2UPC-R203 series: Approx. 8.0 sec.
2UPC-R204 series: Approx. 8.0 sec.
2UPC-R205 series: Approx. 12.5 sec.
2UPC-C26/R206 series: Approx.
14.5 sec.
(Printing time may vary depending on the
conditions of use.)
Input connector AC IN (for power)
Control connector
RS-232C (External control interface,
D-SUB 9-pin connector) (1)
USB function port
Hi-Speed USB (USB2.0)
USB host port For the USB memory (3)
Note