Filter
Top Products
System Overview
8
Flash Mode Setting Parameters
The flash mode is factory set to Program, but you can change the setting using the menus if necessary. The shooting
conditions available for configuration differ depending on the flash mode setting, as shown in the table below.
: Default setting
Effects of the F value while shooting
Even if the F value is changed through zoom operations, the flash intensity level and ISO sensitivity are automatically
adjusted before shooting to ensure that the brightness of a captured image will not be affected.
Flash Mode Flash Control Aperture Shutter Speed White Balance Exposure
Compensation
Controlled Flash
without pre-flash
Program with Zoom and EV Fixed
(F4.7)
Fixed
(1/250)
Program –2.0EV to 0EV to
+2.0EV (in 1/4EV
steps)
Forced Flash
without pre-flash
7 steps
(100/70/50/35/25/18/12%)
without Preflash
F4.7
(F4.7 or F5.6)
1/250
(1/2 to 1/1000 [s])
Program, 3000 to
7000K or OnePush
–1.0EV to 0EV to
+2.0EV (in 1/4EV
steps)
Exhibit Flash No Lighting F4.7
(F4.7 or F5.6)
1/250
(1/2 to 1/1000 [s])
Program
, 3000 to
7000K, OnePush
–1.0EV to 0EV to
+2.0EV (in 1/4EV
steps)