Filter
Top Products
DEFINITY Enterprise Communication Server Release 9
Getting Started with the Avaya R300 Remote Office Communicator
Issue 1
November 2000
Avaya R300 Installation and Upgrade
38Installing the Avaya R300
3
2. Place the top of the 68-pin connector at a 45-degree angle to the far right side of
the pins (see Figure 13).
Figure 13. Connector at proper angle (45 degrees) for insertion
3. Move the connector so it is parallel to the pins.
4. Firmly push the connector in until it clicks into place.
!
CAUTION:
Do not force the connector into place if it isn’t aligned properly. If you force
the connector, you can bend the pins. Also be sure the connector is not
installed upside down. This is possible.
prdfmax2 LJK103100