Filter
Top Products
DEFINITY Enterprise Communication Server Release 9
Getting Started with the Avaya R300 Remote Office Communicator
Issue 1
November 2000
DEFINITY Administration for the Avaya R300
61Set up signaling group
4
Setting up a trunk group
You can modify an existing trunk group or add a new one.
1. Type add trunk group <trunk group number or next>.
Screen 16. Trunk Group
2. On the Trunk Group screen, complete the following fields:
■ Group Type: Type ISDN.
■ Carrier Medium: Type IP.
■ Service Type: Type tie.
■ Codeset to Send Display: Type 0.
The default is 6, and this should be changed to 0 to support interoperability
with non-DEFINITY systems.
3. Go to the Group Member Assignments screen to associate the trunk group with the
signaling group.
add trunk-group next Page 1 of x
TRUNK GROUP
Group Number: 6 Group Type: ISDN CDR Reports: _
Group Name: Remote office 6 COR: __ TN: ___ TAC: 6
Direction: ________ Outgoing Display? _ Carrier Medium: ____
Dial Access? _ Busy Threshold: ___ Night Service: _____
Queue Length: ___
Service Type:tie Auth Code? _ TestCall ITC: ____
Far End Test Line No:_
TestCall BCC: _
TRUNK PARAMETERS
Codeset to Send Display:_ Codeset to Send National IEs:_
Maximum Message Size to Send:__ Charge Advice:____
Supplementary Service Protocol:_ Digital Handling (in/out):____
Trunk Hunt:________
Digital Loss Group:__
Calling Number - Delete: ____ Insert:_______Number Format:_____
Bit Rate: _____ Synchronization: _____ Duplex: ____
Disconnect Supervision - In? _ Out? _
Answer Supervision Timeout: _