Filter
Top Products
DEFINITY Enterprise Communication Server Release 9
Getting Started with the Avaya R300 Remote Office Communicator
Issue 1
November 2000
Avaya R300 Administration
70Assign IP address to the Avaya R300
5
Assign IP address to the Avaya R300
Assign an IP address to the Avaya R300 using a dumb terminal, workstation, or PC
connected by a serial connection. Refer to the MAX 3000 Installation and Basic
Configuration Guide, Chapter 3: “MAX User Interfaces,” for instructions on configuring
your PC or workstation.
NOTE:
You must complete this step, at minimum, for Telnet administration to work.
To assign an IP address, set the IP Adrs field in the Ether Options profile, which is located
in Ethernet > Mod Config > Ether Options. Proceed as follows:
1. From the Main Edit Menu, select Ethernet > Mod Config > Ether Options.
The following list of parameters appears. (The settings shown are examples only.)
2. Complete the IP Adrs field with the IP address and (optional) subnet mask of the
Avaya R300. A slash (/) separates the address and the mask. For example,
198.5.248.40/24 indicates that 24 bits (for example, 255.255.255.0) of the IP
address are interpreted as network bits.
3. Press the Left Arrow key to exit the Ether Options profile.
A confirmation menu appears.
|
-------- MAX EDIT ------------
|
--------------------
|
|
--------------------
|
|40-100 Mod Config ?? | |10-100 1234567890 ??| |30-000 Line Stat |
| Ether options... | | L1/RA nnnnnnnnnn | | 123456789012 A |
| >IP Adrs=111.1.111.11/24 | | 12345678901234 | | ---.......... - |
| 2nd Adrs=0.0.0.0/0 | | nnnnnnnnnnnnnn | | ............ - |
| RIP=Off | |--------------------| |--------------------|
| 2nd RIP=Off | |10-200 1234567890 ??| |00-200 15:10:34 ??|
| RIP2 Use Multicast=No | | L2/DS @@@@@@@@@@ | |>M31 Line Ch |
| Ignore Def Rt=Yes | | 12345678901234 | | Ethernet up |
| Proxy Mode=Off | | @@@@@@@@@@@@@@ | | |
| Filter=0 | |--------------------| |--------------------|
| IPX Frame=None | |40-300 WAN Stats ??| |40-400 Ether Stat ??|
| IPX Enet#=N/A | |>Rx Pkt: 118^| |>Rx Pkt: 3486092 |
| IPX Pool#=N/A | | Tx Pkt: 511 | | Tx Pkt: 10056 |
| IPX SAP Filter=N/A | | CRC: 0v| | Col: 3530 |
| Handle IPX Type20=N/A | |--------------------| |--------------------|
| | |00-100 Sys Option | |40-100 Sessions ??|
| | |>Security Prof: 1 ^| |> 0 Active |
| | | Software +8.0.0+ | | |
| | | S/N: 9320027 v| | |
Press Ctrl-n to move cursor to the next menu item. Press return to select it.
Press Tab to move to another window --- thick border indicates active window.