Filter
Top Products
116
E
Using a Memory Card
Recording Movies onto a Memory Card
You can record movies onto a memory card. Transferring the movie to a PC
allows you to view it on the PC or to attach it to your e-mail (please refer to
the DIGITAL VIDEO SOLUTION DISK Software Instruction Manual for detailed
instructions).
In addition to the movie you record directly onto the memory card, you can
record movies from a tape or input via the AV terminal (analog line-in) or the
DV terminal onto the memory card.
The sound of the movie recorded to a memory card will be monaural.
• Make sure a memory card with enough memory available is inserted into
the camcorder.
• When you are using an SD Memory Card, make sure the protect switch is
set to allow recording.
• While the card access indicator flashes, do not disconnect the power
source. Doing so could result in data damage.
1. Turn the POWER switch to CAMERA.
2. Move the TAPE/CARD switch to CARD.
3. Press the START/STOP button.
• You can record up to 10 seconds in 320 × 240 and 30 seconds in 160 ×
120.
• Press the START/STOP to end recording.
• The camcorder starts to write the movie to the memory card when
recording is finished.
Notes:
• For using the self-timer ( 73), set the self-timer before step 3, and then
press the START/STOP button.
• Do not load/unload a tape during recording. Sound will not be recording
during this operation.
+
CAMERA
CARD