Filter
Top Products
94
E
Editing
1. Find a point on your recorded cassette slightly before the
section you wish to copy and set it to playback pause mode.
2. Press the REC PAUSE button on the wireless controller.
• S-video and AV IN/OUT terminals work as input terminals.
• The camcorder enters record pause mode.
3. Start playback on the other device or turn on the TV to see
the desired program while you monitor the picture.
4. Press the pause button.
• Recording starts.
5. When you get to the point where you wish to stop
recording, press the stop button or the pause button.
• Recording stops.
6. Stop playback on the other device.
Note:
• You can monitor the picture in the viewfinder or LCD screen.
Dubbing
3. Turn the camcorder’s POWER switch to to PLAY (VCR), and
move the camcorder’s TAPE/CARD switch to TAPE.
4. Load a blank cassette.