Filter
Top Products
179
E
Additional
Information
Printer Cover Open
You attempted to trim an image with an image size
of 160 × 120.
The style has been changed after the trimming
settings were set.
The paper size has been changed between print
setting from the print dialog and the start of
printing.
You attempted to print on paper that cannot be
used with the camcorder.
The ink cannot be used with the selected paper
type.
The printer is printing the data from a memory card
inserted into the computer or printer. The printer
automatically starts printing the images from the
camcorder after completing the current printing.
Printer is warming up. When it is ready, the printer
starts printing automatically.
The ink tank needs to be replaced soon. Prepare a
new ink tank. If you select [Continue] in the error
screen, you can restart printing.
Adjust the paper selection lever to the proper
position.
You can restart printing by pressing the
RESUME/CANCEL button on the BJ Printer. Please
request replacement of the waste tank to the shop
where you purchased the printer or the nearest
Canon customer support center listed in the Bubble
Jet Quick Start Guide.
Close the front cover of the printer.
Cannot trim
Readjust trimming
Paper and ink do not match
Paper has been changed
Incompatble paper size
Printer In Use
Printer Warming Up
Low Ink Level
Paper Level Error
Waste Tank Full